Top 10 Aluminium Scrap Dealers in Maharashtra | Sudarshan Recycling

What Is Aluminium Scrap?

Aluminium scrap is any discarded or surplus aluminium that is collected so that it can be melted and used again. It comes from two broad sources. New scrap, also called process or industrial scrap, is created during manufacturing, for example the offcuts, turnings and trimmings left behind when sheets, profiles and castings are made. Old scrap, also called post-consumer scrap, comes from products that have reached the end of their life, such as window frames, utensils, vehicle parts, cables, radiators and beverage cans.

The value of a lot of aluminium scrap depends on how clean it is, how well it is sorted and which alloy it belongs to. Clean, single-alloy scrap fetches a higher rate than mixed, painted or oily material, because it needs less refining and gives a more predictable result in the furnace. That is why a good aluminium scrap dealer spends as much effort on sorting and grading as on buying and selling.

Once collected, aluminium scrap is baled, shredded or melted and cast into ingots, billets or sows. Those ingots then go to die-casting units, foundries, extruders and rolling mills, where they are turned into finished products. In this way, scrap is not waste. It is a raw material that keeps industry running.

Aluminium Scrap Dealers, Buyers & Suppliers in Maharashtra

Maharashtra is one of India's largest industrial states, and its demand for aluminium is high. Automotive plants in Pune and Chakan, foundries and die-casting units in Pune, Kolhapur and Nashik, extrusion and fabrication shops around Mumbai and Thane, and electrical and engineering works across the state all consume large volumes of aluminium, and a large part of that demand is met with recycled metal. Because the state has so many melting and casting units, the aluminium scrap market is active at every level, from small collectors and merchants to large wholesalers and recycling companies.

In this market, an aluminium scrap dealer is the link between those who generate scrap and those who need it. A dealer collects scrap from many sources, checks and sorts it, arranges weighing and transport, and supplies it to melters and manufacturers in the quantity and quality they need. Aluminium scrap traders and merchants work the same way, buying where scrap is available and selling where demand is, while wholesalers handle large, regular volumes for industrial customers.

What buyers and sellers can expect from a professional aluminium scrap dealing company is simple: honest weighing, clear grading, fair rates linked to the market, prompt payment and dependable logistics. These are the standards we follow in every transaction.

Types of Aluminium Scrap

Aluminium scrap is sold in many forms. The grade, source, alloy and cleanliness affect its price and best recycling application. The main types of aluminium scrap we deal in are given below.

• Aluminium Extrusion Scrap: Comes from window frames, door sections, profiles and structural shapes. It is commonly from the 6063 alloy family and is in strong demand from extruders and billet manufacturers. Painted or anodised sections are generally separated from clean, mill-finish material.
• Aluminium Wire Scrap: Includes electrical conductor wire and cable aluminium. Clean wire with insulation and steel core removed generally commands a better rate, while insulated or mixed wire requires additional processing.
• Aluminium Sheet Scrap: Comes from roofing sheets, cladding, signboards, offset printing plates and fabrication offcuts. Clean, uncoated sheet is easy to melt, while painted or coated sheet may have higher melt loss and processing requirements.
• Aluminium Cast Scrap: Includes engine blocks, cylinder heads, gearbox housings, pump bodies and machinery castings. These are mainly silicon-bearing alloys used for secondary alloy ingots such as ADC12 and LM24. Iron, bolts, bushings and other attachments should be removed before melting.
• Aluminium Utensil Scrap: Includes old pots, pans, cookers, vessels and other household aluminium items. It is commonly used by foundries and remelters, with handles, steel parts and non-metallic fittings separated before sale.
• Aluminium Radiator Scrap: Comes from vehicle and industrial radiators, heat exchangers and similar equipment. It may contain copper, brass or plastic fittings, which are separated before processing. Clean aluminium fins and tubes are used in secondary alloy production.
• Aluminium Wheel Scrap: Comes from vehicle alloy wheels and is generally a relatively clean cast aluminium alloy. It is widely used by foundries, while tyres, weights, valves and steel parts should be removed before recycling.
• Aluminium Turnings (Borings) Scrap: Consists of fine chips and shavings produced during machining. It may contain oil and cutting fluids and has a high surface area, increasing melt loss. After de-oiling, drying and alloy sorting, it is commonly baled or briquetted.
• UBC (Used Beverage Can) Scrap: Consists of used aluminium beverage cans and is an important input for rolling mills, can sheet producers and remelters. Cans should be free of foreign material and are normally compacted into bales for transport.

Aluminium Scrap Grades and Specifications

The table below gives a general overview of the main scrap types. Exact composition, cleanliness and rates depend on the individual lot, so we recommend confirming your requirement before ordering or selling.

Aluminium Scrap Recycling Process

Recycling turns collected scrap into usable aluminium ingots and billets. For aluminium scrap recycling companies and dealers, the quality of every step affects the final yield. A typical process follows these steps.

• Collection and purchase: Scrap is bought from factories, workshops, contractors and collectors, and brought to the yard.
• Weighing and inspection: Each lot is weighed and checked for alloy type, contamination and moisture.
• Sorting and segregation: Scrap is separated by type and alloy family. Iron, plastic, rubber and other foreign material are removed.
• Cleaning and preparation: Oily or painted material is cleaned or de-coated where needed. Light scrap such as turnings and cans is baled or briquetted.
• Melting: The scrap is melted in a furnace under controlled temperature. Fluxes are used to lift oxides and impurities to the surface.
• Skimming and degassing: Aluminium dross is skimmed off and dissolved gases are reduced so that the cast metal is dense and sound.
• Composition adjustment and testing: Alloying elements are added until the melt matches the target grade, and samples are tested.
• Casting: The metal is poured into ingot or billet moulds and left to solidify.
• Finishing and dispatch: Ingots are cooled, cleaned, marked and prepared for delivery.

Benefits of Aluminium Scrap Recycling

Recycling aluminium makes sense for the environment, for industry and for the business that trades in it.

• Large energy saving: Making aluminium from scrap uses only a small fraction of the energy needed to produce primary aluminium from bauxite, which also cuts carbon emissions.
• Endless recyclability: Aluminium can be melted and used again and again without losing its basic properties.
• Lower raw material cost: Scrap-based metal is generally more economical than primary metal, which helps foundries and manufacturers keep costs down.
• Less waste to landfill: Recycling keeps metal in use and out of dumps, and reduces the need for mining.
• Steady supply: A well-organised scrap supply chain gives manufacturers a dependable source of raw material.
• Income for sellers: Factories, workshops and collectors earn value from material that would otherwise be thrown away.

Applications of Aluminium Scrap

Recycled aluminium goes back into almost every industrial sector. The main areas where scrap-based metal is used are given below.

• Automotive: Engine parts, cylinder heads, gearbox housings, wheels and brackets made from secondary alloy ingots.
• Construction: Window and door profiles, structural sections and cladding made from extrusion billets.
• Electrical industry: Conductors, busbars, cable and motor housings.
• Packaging: Cans, foil and food containers made from recycled sheet and can stock.
• Machinery and engineering: Pump bodies, tools, gearboxes and general castings.
• Consumer goods: Cookware, appliance parts, lighting and furniture components.
• Steel industry: Aluminium is also used as a deoxidiser in steelmaking.

Quality Checks and Sorting of Aluminium Scrap

In the scrap business, quality is decided at the point of sorting. A lot that is clean and correctly graded sells faster and for a better price, and it gives the melter a better yield. Every lot we handle goes through the following checks.

• Visual inspection: Scrap is checked for foreign material such as iron, rubber, plastic, soil and moisture.
• Alloy identification: Scrap is separated by type and alloy family so that mixed lots do not lower the value of clean material.
• Weighing: Material is weighed on calibrated scales and the weight is shared with the seller or buyer.
• Contamination control: Oil, paint, insulation and attachments are removed or accounted for in the grade and rate.
• Segregation and storage: Different grades are stored separately and kept dry so that quality is maintained until dispatch.
• Documentation: Lot details and weights are recorded so that every delivery can be traced.

Why Choose Us?

• Dealer, supplier and buyer in one: We buy and sell aluminium scrap, so you can use us whether you want to sell your scrap or source it.
• Wide range of scrap types: Extrusion, wire, sheet, cast, utensil, radiator, wheel, turnings and UBC scrap are available.
• Honest weighing and grading: Lots are weighed and graded openly, and the basis of every rate is explained.
• Fair, market-linked rates: Rates follow the market and the grade, with clear terms and no hidden charges.
• Bulk and regular supply: We take single lots and repeat monthly schedules.
• Timely logistics: We plan loading and dispatch so that material reaches you when you need it.
• Pan-Maharashtra service: We serve buyers and sellers across Maharashtra from our base in Pirangut, Pune.
• Many metals from one source: Along with aluminium scrap and aluminium ingot, we deal in MS scrap, copper scrap, brass scrap, zinc scrap, stainless steel scrap, battery scrap and SISA scrap.

Conclusion

Sudarshan Recycling is a trusted aluminium scrap dealer, supplier and buyer in Maharashtra. With careful sorting, honest weighing, fair rates and dependable delivery, we help foundries, remelters and manufacturers get the aluminium scrap they need, and we help sellers get full value for theirs. Whether you want to sell a single lot or arrange a regular supply, contact us today to discuss your grade, quantity and location.

FAQs

1. What is aluminium scrap?

Aluminium scrap is discarded or surplus aluminium, from manufacturing offcuts or from products at the end of their life, that is collected so it can be melted and used again. It is sorted by type and alloy, then recycled into ingots, billets and other forms.

2. What are the different types of aluminium scrap?

The main types are extrusion, wire, sheet, cast, utensil, radiator, wheel, turnings and used beverage can (UBC) scrap. Each differs in alloy, cleanliness and use, so each is priced differently.

3. How is aluminium scrap priced in Maharashtra?

The main factors are the global aluminium price, the exchange rate, the type and alloy of scrap, how clean and well sorted it is, the quantity and the delivery location. Rates change often, so the current price should be confirmed for your specific lot.

4. How is aluminium scrap recycled into ingots?

Scrap is collected, sorted, cleaned and melted in a furnace. Dross and gases are removed, the composition is adjusted and tested, and the metal is cast into ingot moulds. Common alloy ingots made this way include ADC12 and LM24.

5. Do you buy and sell aluminium scrap across Maharashtra?

Yes. Sudarshan Recycling buys aluminium scrap from sellers and supplies it to buyers across Maharashtra. Share your scrap type, quantity and location to discuss rates and dispatch.

6. How do I sell aluminium scrap to Sudarshan Recycling?

Contact us with the type of scrap, approximate quantity and location, along with photos if possible. We will confirm the grade and rate, arrange weighing and pickup or delivery, and process payment on the agreed terms.